LumaBooth 5.4.2 focuses on USB direct printing: you can now choose the exact print size your loaded ribbon supports, get full-bleed prints that use the whole sheet, and see clearer, translated printing options throughout Print setup.

Printing

• Added the ability to choose the print size for the ribbon you have loaded (5x7, 6x8, 6x6, 5x5, 6x9, 4.5x6 and more) instead of having the size guessed from your template shape, with the cut options that belong to each size.
• Multi-up sizes now fill the whole sheet, so choosing one copy on a 2-up size prints two photos on one sheet rather than wasting half of it.
• The print button and the guest copies screen now show how many prints a press will produce, so you always know what is coming out of the printer.
• Resolved an issue where a print could be composed at a smaller size than the loaded ribbon, leaving white borders and wasting the sheet.
• Print sizes your printer's firmware cannot handle are no longer offered, so you never pick a size that dead-ends at a firmware message.
• Corrected the "Cut into 2x6 strips" switch so it only appears when the paper actually in the printer can be strip-cut.
• The printed test page now carries the proper LumaBooth branding and logo.

Printer Support

• Added support for the SwiftFoto KSF-10R, which previously reported as an unsupported printer when connected.
• HiTi prints on older ribbon batches now show accurate colors, removing the warm cast those ribbons produced.
• Improved the messages shown when a HiTi printer refuses a job: you now get plain-language guidance instead of a technical code.

Print Setup

• Redesigned the paper size picker in the photo layout editor as a large, easy-to-tap list that includes every size your connected printer supports, sorted small to large.
• In landscape, the Alignment card now sits under Select print method so the two columns are balanced.
• Rounded the corners of the "Printing…" overlay to match the rest of Print setup.
• The plus and minus buttons on the per event and per session limit rows now line up with the number and the "prints" label beside them.

Languages

• The USB Direct Printing settings are now translated into German, Spanish, French, Italian and Portuguese, and longer size names wrap instead of being cut off.

This release is all about HiTi printing over USB Direct: better color, sharper prints, wider printer support, and clear messages when your printer needs attention.

Printing

• HiTi prints now use the printer's own color profile, so colors match what HiTi's official driver produces instead of running warm.
• Prints are sharpened the way HiTi's own driver sharpens them, so photos come off the printer noticeably crisper.
• Portrait photos printed on landscape paper are sharpened correctly, with no streaking.
• The HiTi P520L now works over USB Direct Printing, alongside the P525L.

Printer Messages

• When a HiTi printer stops mid-print, LumaBooth tells you what is wrong, whether it is a paper jam, an empty ribbon or an open cover, and what to do about it, instead of showing a numbered error code.
• USB printing problems now read in plain language instead of raw error codes, so you know whether to enable the driver, reconnect the cable or check the printer.

This update brings mirror and flip controls for your captures, Mac keyboard shortcuts, a resizable live view on the welcome screen, and printing that works with more printers and more layouts. It also fixes freezes, crashes, and sync issues that could interrupt an event.

New

• Mirror or flip captured photos and videos, so what you print and share matches what your guests expect
• Keyboard shortcuts on Mac let you drive the booth without touching the screen
• Resize the live view on the Welcome Screen to fit your event design
• Print 2 per page now works with any template size, not just strips
• Citizen CX-02, CX-02W, and CZ-01 printers work with USB Direct Printing on iPad
• Printing text labels (printing message, copies title, button label) now sync with the dashboard

Fixes

• Fixed a freeze between the countdown and the photo being taken
• DNP DS620 and DS820 printers now wake automatically from standby instead of failing the print
• Fixed event data being deleted on devices with very large event lists
• Newest events now appear on accounts with more than 100 events
• Fixed a crash when loading an event with a very large layout
• Fixed a crash when loading events after importing with Replace
• Fixed a rare crash on the first launch after a fresh install
• Deleting a soundtrack or animated overlay now syncs to your other devices
• Sticker settings refresh right away when changed from another device
• Live view settings panel no longer overlaps the position fields in portrait
• Guest background chooser arrows show correctly and follow your theme color
• Fixed truncated "Choose a Template" text in French

Print straight from your iPad. Connect a DNP, Citizen, or HiTi photo printer with a single USB-C cable and start printing. No AirPrint, no print server, no drivers to install. (Requires an iPad with an M-series chip, M1 or later, running iPadOS 16 or later.)

Printing

• Print directly to a supported dye-sub printer over USB. Plug in the cable, pick USB Direct Printing in Print Setup, and your prints come out. Nothing to install.
• Supports DNP and Citizen printers: DS-RX1, DS40, DS80, DS620, DS820A, DS820DX, and QW410.
• Supports the HiTi P525L, with full color management so skin tones stay warm and true.
• Cut 4×6 prints into two 2×6 strips. Turn on "Cut into 2×6 strips" and classic photo strips come off the printer ready to hand out. The option appears only on printers and media that can actually do it.
• See how much media is left. Your remaining print count shows right in Print Setup, so a ribbon never runs out mid-event by surprise.
• Printer messages now say what is actually wrong, in plain language. "The printer cover is open" instead of a mystery error.
• Prints recover from brief connection hiccups on their own instead of failing.

Print Setup

• The Print Setup screen is clearer, with better spacing and print method options that are easy to tap on every device.
• Printer status is easier to read at a glance, so you know your printer is ready before guests line up.
• Setup guidance walks you through connecting a printer directly the first time.

A sharper booth experience from start to share. Smoother editing on iPad, more reliable event copying, brighter video on Mac webcams, two new GIF aspect ratios, and a round of stability fixes.

AI Portraits

• Fixed an issue where duplicating an event left its AI Portrait reference images (subject, scene, style, and logo) broken in the copy.

Event Management

• Resolved an issue where copying an event could lose the text from your print layouts when the copy was opened on another device.

Booth Experience

• Added the option to hide the Photo, GIF, Boomerang, and Video start buttons on the Welcome screen. Useful for single booth mode events where the guest can tap anywhere on the screen to start.
• Fixed the Welcome screen so it now reflects live view aspect ratio changes and updates its background image after live view is turned off from the dashboard.
• Fixed an issue where backgrounds couldn't be selected for background removal while 360 mode was enabled.
• Live view now keeps a consistent aspect ratio when a background is chosen during a background removal session, so framing stays steady throughout.
• Added 3:2 and 2:3 aspect ratio options for GIFs.

Layout Editor

• Fixed an issue on iPad where items drifted away from your finger, farther the more you dragged, when repositioning them in the editor.
• Improved handling of small items so their resize handles no longer overlap, making them easy to resize on iPhone.
• Photos now stay within the canvas when added to a square layout, instead of landing mostly off‑screen.

Printing

• Clarified the print limit labels to read "Per event limit" and "Per session limit" for easier setup.

Camera Support

• Fixed an issue where video and Boomerang recordings appeared noticeably darker than photos when using a USB webcam (such as the Logitech BRIO) on Mac.

Stability

• Improved stability when saving print layouts in the editor, addressing a long‑standing crash.

A sharper booth experience from start to share. Smoother editing on iPad, more reliable event copying, brighter video on Mac webcams, two new GIF aspect ratios, and a round of stability fixes.

AI Portraits

• Fixed an issue where duplicating an event left its AI Portrait reference images (subject, scene, style, and logo) broken in the copy.

Event Management

• Resolved an issue where copying an event could lose the text from your print layouts when the copy was opened on another device.

Booth Experience

• Added the option to hide the Photo, GIF, Boomerang, and Video start buttons on the Welcome screen. Useful for single booth mode events where the guest can tap anywhere on the screen to start.
• Fixed the Welcome screen so it now reflects live view aspect ratio changes and updates its background image after live view is turned off from the dashboard.
• Fixed an issue where backgrounds couldn't be selected for background removal while 360 mode was enabled.
• Live view now keeps a consistent aspect ratio when a background is chosen during a background removal session, so framing stays steady throughout.
• Added 3:2 and 2:3 aspect ratio options for GIFs.

Layout Editor

• Fixed an issue on iPad where items drifted away from your finger, farther the more you dragged, when repositioning them in the editor.
• Improved handling of small items so their resize handles no longer overlap, making them easy to resize on iPhone.
• Photos now stay within the canvas when added to a square layout, instead of landing mostly off‑screen.

Printing

• Clarified the print limit labels to read "Per event limit" and "Per session limit" for easier setup.

Camera Support

• Fixed an issue where video and Boomerang recordings appeared noticeably darker than photos when using a USB webcam (such as the Logitech BRIO) on Mac.

Stability

• Improved stability when saving print layouts in the editor, addressing a long‑standing crash.

A sharper booth experience from start to share. Smoother editing on iPad, more reliable event copying, brighter video on Mac webcams, two new GIF aspect ratios, and a round of stability fixes.

AI Portraits

• Fixed an issue where duplicating an event left its AI Portrait reference images (subject, scene, style, and logo) broken in the copy.

Event Management

• Resolved an issue where copying an event could lose the text from your print layouts when the copy was opened on another device.

Booth Experience

• Added the option to hide the Photo, GIF, Boomerang, and Video start buttons on the Welcome screen. Useful for single booth mode events where the guest can tap anywhere on the screen to start.
• Fixed the Welcome screen so it now reflects live view aspect ratio changes and updates its background image after live view is turned off from the dashboard.
• Fixed an issue where backgrounds couldn't be selected for background removal while 360 mode was enabled.
• Live view now keeps a consistent aspect ratio when a background is chosen during a background removal session, so framing stays steady throughout.
• Added 3:2 and 2:3 aspect ratio options for GIFs.

Layout Editor

• Fixed an issue on iPad where items drifted away from your finger, farther the more you dragged, when repositioning them in the editor.
• Improved handling of small items so their resize handles no longer overlap, making them easy to resize on iPhone.
• Photos now stay within the canvas when added to a square layout, instead of landing mostly off‑screen.

Printing

• Clarified the print limit labels to read "Per event limit" and "Per session limit" for easier setup.

Camera Support

• Fixed an issue where video and Boomerang recordings appeared noticeably darker than photos when using a USB webcam (such as the Logitech BRIO) on Mac.

Stability

• Improved stability when saving print layouts in the editor, addressing a long‑standing crash.

This update resolves a crash that could occur when duplicating events, making it safer to reuse your favorite event setups.

Stability

• Fixed an issue where copying an event's settings could cause the app to crash for events that had never had print or copy settings configured.

This update brings Custom AI Portraits to LumaBooth for Apple — write your own prompt to generate exactly the look you want, and personalize it for every guest. It also redesigns the guest browse and sharing experience, improves USB webcam support on iPad, refreshes the app's typography, and resolves a wide range of stability and reliability issues.

Custom AI Portraits

• Write your own prompt to generate exactly the look you want, going beyond the built-in presets
• Per-preset guest questions let a single custom prompt produce a personalized portrait for every guest, using answers like their name, jersey number, or chosen theme
• AI Portraits now process all photos as a batch after capture completes instead of one at a time, for a smoother guest flow
• Refreshed the guest-facing AI Portrait screens with a black theme to match other guest screens, plus numerous layout and font improvements
• Added an AI Portrait indicator to the event list and improved error handling with clearer retry and cancel options
• Resolved an issue where presets from older events could fail to load, and where a guest screen could get stuck downloading a thumbnail

Browse & Sharing

• Redesigned the start screen browse and the Photo/Print/GIF sharing screens to match the look of dslrBooth, including a new stacked-card thumbnail style
• Added a session gallery so guests can scroll through all photos from a session, with on-appear scroll hints and polished layout
• Improved thumbnail rendering and aspect-ratio handling so images are no longer clipped
• Fixed GIF-only sessions showing two GIF items on the recent browse screen

Camera & Webcam

• Improved USB webcam support on iPad (iPad with USB-C, iOS 17+): live preview and captured images now use the correct orientation and mirroring, and cameras are shown by their hardware name
• Resolved camera-related crashes on Mac when a device doesn't support the requested capture settings

Printing

• Per-event print settings now sync via the cloud, so print configuration follows the event

Surveys & Text Messaging

• Survey question types saved on iOS now match the dashboard and Windows booth
• Resolved an issue that prevented SMS messages from sending, and fixed the SMS send button not being visible on iPhone in landscape

Appearance

• Updated the app to use a new font throughout for a cleaner, more consistent look
• Improved color selection, including reliable hex color code entry
• Fixed text being cut off on larger iPad displays and refreshed several guest-facing screens

Stability & Reliability

• Events now sync more reliably after Wi-Fi interruptions, so overlays and settings are no longer lost on a dropped connection
• Resolved crashes when opening events created on older versions of LumaBooth for Windows, and when loading green screen backgrounds
• Improved video processing reliability and quieted noisy startup warnings
• Fixed the Cancel button doing nothing in the Create/Copy Event view on Mac

This update improves AI Portrait quality guidance, resolves several crash issues, and fixes email sharing for international domains.

AI Portraits

• Added on-screen warnings when too many people are in the frame or subjects are too far from the camera, helping users get better AI Portrait results
• Improved AI Portrait browse screen layout when rotating the device

Email Sharing

• Resolved an issue where email addresses with international domains (such as .com.mx or .co.uk) were incorrectly rejected as invalid
• Improved email reply-to field handling so trailing spaces no longer cause send failures

Camera

• Resolved a crash that could occur when switching cameras with previously saved zoom settings

Stability

• Fixed a crash in the upload retry service that could occur under heavy sharing load
• Improved upload queue management

Virtual Attendant

• Resolved an issue where adding custom media to default Virtual Attendant styles did not update the interface

User Interface

• Fixed a stretched toggle button on the Event Link screen on iPhone

Internal

• Improved modal presentation code for better maintainability and clearer lifecycle behavior

This release improves the accuracy of AI Portrait enhancements, resolves an issue with corrupted video uploads to fotoShare, and fixes a mislabeled button in the AI Portrait skip screen.

AI Portraits

• Improved AI Portrait results by automatically cropping images around detected subjects before sending to the AI, giving the AI a tighter, more focused view of the people in the photo
• Resolved an issue where face cropping could produce incorrect results for photos taken with certain camera orientations
• Fixed an issue where the "Skip AI Portrait" screen displayed the wrong label text when the button label had been customized

Photo Sharing

• Resolved an issue where videos uploaded to fotoShare could appear corrupt or cut short, even though the original files on the device were intact

This release addresses a macOS App Store review requirement with no changes to functionality for end users.

macOS Compatibility

• Removed an unused location entitlement from the macOS build that was flagged during App Store review, with no impact on app features or behavior

This release focuses on stability improvements — resolving several crashes that could occur during camera operation and AI Portrait sessions, and improving the quality of AI-enhanced portraits.

AI Portraits

• Improved AI portrait quality by automatically cropping images around detected subjects before sending to the enhancement API, giving the AI a tighter, more focused view of the people in the photo
• Resolved an issue where the "Skip AI Portrait" button label did not reflect customized text set in event preferences
• Fixed an issue where returning from the AI Portrait browse screen could prevent the event home screen from refreshing properly

Camera Support

• Resolved a crash that could occur when switching cameras due to white balance values falling outside the supported range
• Fixed a crash that could occur when accessing event preferences from a background camera processing thread during live view

This release brings improved accessibility across all guest-facing screens, more reliable AI Portrait processing for DSLR and external cameras, a smoother event creation flow from the app, and important stability fixes for camera-connected devices.

Accessibility

• Improved color contrast across all guest-facing popup screens to meet WCAG AA standards, ensuring text and buttons remain legible with any theme color, including light pastels and dark backgrounds
• Resolved an issue where the progress bar and cancel button were invisible on black-background screens when viewed in landscape mode
• Fixed button, font, and input field styling consistency across Disclaimer, Survey, Signature, and email/SMS screens

AI Portraits

• Resolved an issue where AI Portrait processing could get stuck at 90% when using a DSLR or external camera by resizing images before upload
• Improved handling of image compression failures — the app now shows a clear alert and exits gracefully instead of displaying a stuck screen
• Fixed AI Portrait processing for Canon EOS M50 Mark II and other external cameras that produce large image files

Event Management

• Opening "Create Event" from within the app now takes you directly to the new event form on the Dashboard, eliminating an extra manual step

Stability

• Fixed a crash that could occur during live camera preview on DSLR and external cameras due to a thread-safety issue when reading event preferences

This release focuses on reliability improvements to AI Portraits, fixes for several crashes reported in the field, and a number of polish updates across the guest experience, welcome screen, and sharing features.

AI Portraits

• Improved the AI Portrait preset selection screen to automatically select the preset when only one is configured, so guests can start immediately without an extra tap
• Added a configurable "Skip AI Portrait" option that event operators can enable, allowing guests to bypass AI processing and continue with their original photo
• When capturing multiple photos with AI enhancement, the progress screen now shows which photo is being processed (e.g., "1 of 3") so guests understand the app is making progress
• Resolved a UI issue where duplicate progress text appeared during AI Portrait generation
• Fixed the progress bar so it correctly restarts from 0% when a guest manually retries AI Portrait generation, rather than staying frozen at the previous value
• Improved error handling so that if AI Portrait generation fails after all retries, the session continues with the original photo rather than leaving guests stuck
• Improved error handling so sessions continue with the original photo if the enhanced image fails to save
• Updated the AI Portrait error message to "An unexpected error occurred. Please try again." for consistency across platforms
• Removed the ellipsis from the "Retrying" message during AI Portrait generation, since the progress animation already communicates that the app is working
• Fixed an issue where live view would freeze after a guest cancelled AI preset selection
• Fixed a crash that could occur when Firebase returned unexpected data in AI Portrait settings

Welcome Screen

• Fixed an issue where images and buttons on the welcome screen would shrink each time the event was launched and the editor was reopened

Stability

• Fixed a crash that could occur when deleting a layer from a template
• Fixed a crash caused by a thread-safety issue when the camera was processing live frames in the background while event preferences were being accessed
• Fixed a crash related to invalid Firebase event data encountered during live camera sessions
• Fixed an issue where the app would navigate to the layout screen instead of the home screen after a fresh install when permissions had been previously granted

Sharing & Email

• Fixed an issue where special characters such as curly apostrophes in email subjects or bodies could cause encoding errors, improving compatibility with smart punctuation on iPad
• Fixed an issue where button and placeholder text became invisible when white was selected as the primary color in SMS and sharing screens
• Improved button color contrast across guest-facing screens when white or low-contrast colors are selected as the primary theme color

Subscriptions & App Store

• Made the Terms of Use and Privacy Policy links tappable on the subscription screen, satisfying App Store Review requirements for auto-renewable subscriptions

Dashboard

• When tapping "Create Event" in the app, the Dashboard now opens directly to the new event creation screen instead of the events list

This release focuses on stability improvements, Visual Attendant reliability, and a number of polished UI refinements to give photographers a smoother experience during events.

Virtual Attendant

• Resolved a crash that could occur when loading events exported from dslrBooth that were missing certain Virtual Attendant audio settings
• Fixed an issue where the after-processing audio file showed an incorrect default filename, causing the wrong sound to play
• Fixed an issue where a start screen video added from the Welcome Screen editor was not saved and would not play when the event launched

AI Portraits

• Resolved an issue where tapping the "Choose your style" text field on iPhone would unexpectedly clear its contents
• Resized preset thumbnails to better fit Mac and iPad screens
• Improved the layout of the settings screen, including a cleaner external link button style and better label alignment on iPad

Booth Capture

• Resolved an issue where a capture button could be missing from the booth screen for certain event configurations

Design & Branding

• Improved spacing between the ON/OFF label and toggle switch across all settings cards
• Updated radio buttons and checkboxes to use the brand color consistently throughout the app
• Fixed an issue where selecting white as the primary color made text invisible in the email and SMS share screens — those screens now always use a legible color combination

Asset Downloads

• Resolved a crash that could occur while downloading booth assets
• Fixed an issue where a cancelled download was incorrectly treated as a failure, which could cause valid asset settings to be removed

Event Compatibility

• Improved handling of events imported from dslrBooth that contain image layers with missing file paths, preventing display errors

This release addresses stability improvements and a visual display issue in the Birthday theme to ensure a smoother experience during event setup.

Templates & Themes

• Resolved an issue where text layers in the Birthday theme displayed a camera icon instead of text when a required font was unavailable on the device

Stability

• Improved stability when checking for missing assets during event loading, preventing a rare crash in the download progress view

LumaBooth 5.0 delivers AI Portraits as a powerful new feature, a fully revamped welcome screen editor with Google Fonts support, deep integration with LumaBooth Dashboard, and significant stability improvements across the board.

AI Portraits

• Added AI Portraits — guests can now select an artistic style and receive AI-transformed portrait images as part of their photo booth session
• Resolved an issue where the AI portrait style selection screen did not appear when using an external camera
• Fixed an issue where the "Choose your style" text field cleared its contents when tapped on iPhone
• Improved sync so that enabling AI Portraits in LumaBooth is correctly reflected when opening the event in LumaBooth Dashboard
• Fixed an issue where retaking a photo during an AI Portrait session could create duplicate images in the gallery
• Added AI Portraits support in Roaming Photographer mode

Welcome Screen Editor

• Added Google Fonts support — text layers can now automatically download and apply thousands of fonts from Google Fonts
• Fixed a bug where images added to the welcome screen were deleted when launching the event a second time
• Resolved an issue where images or overlays added in LumaBooth Dashboard were not appearing on the welcome screen
• Fixed an issue where the screen editor used an incorrect canvas size on certain iPhones, causing designs to not fill the screen edge to edge
• Resolved an issue where custom background image URLs were not saved correctly, preventing LumaBooth Dashboard from displaying the correct background
• Improved compatibility so that welcome screen layers created in other LumaBooth apps are no longer unintentionally modified when opened on iOS
• Fixed text layer ordering issues that caused layers to appear in the wrong order or disappear after changing fonts in LumaBooth Dashboard
• Resolved a false "designed for a different device" warning that appeared when opening a landscape template on the same iPad it was designed on
• Fixed the welcome screen stretching when launching an event in full-screen mode on Mac
• Resolved an issue where font changes made in LumaBooth Dashboard were not reflected in LumaBooth
• Simplified color settings to use a single primary color throughout the guest experience for a more consistent branded look
• Added support for custom font sizes configured in LumaBooth Dashboard
• Fixed corner resize handles appearing as squares instead of circles when adding a new layer
• Fixed welcome screen button text wrapping inconsistently compared to the LumaBooth Dashboard preview
• Fixed an issue where image overlays configured in LumaBooth Dashboard or dslrBooth were not displayed on the guest screen
• Changed the default photo layout to a horizontal four-pose strip

Photo Layouts

• Renamed "Print Layout" to "Photo Layout" throughout the app for clearer, more intuitive terminology
• Event preview now displays thumbnails for all selected photo layouts instead of just one
• Fixed an issue where importing a layout via AirDrop overwrote an existing layout instead of adding it as a new one
• Fixed an issue where the font picker dropdown appeared in an incorrect position on Mac

Virtual Attendant

• Added a portrait video virtual attendant style for a more immersive booth experience
• Added missing virtual attendant slots: Select an Effect, Countdown Video, Before Signature, and Before Countdown
• Built-in virtual attendant styles can now be randomized, matching the behavior of custom styles
• Countdown video now plays its full duration regardless of the countdown timer setting
• Added support for MP3 audio files in the Countdown virtual attendant slot

Camera & Capture

• Added automatic permission handling for wired accessories on iOS 26, eliminating the need to manually configure this in Apple Settings
• Fixed GIF capture to correctly output portrait-orientation results when shooting in portrait mode
• Standardized size options for video, GIF, and 360/Slow-mo captures for a simpler, more consistent experience
• Resolved an issue where the boomerang clip duration was saved with an incorrect default value when creating a new event
• Guests can now tap anywhere on the welcome screen to start a session when only one capture mode is enabled
• Resolved an issue where animated overlays were occasionally not applied to boomerang captures
• Fixed an issue where the app would crash or stall when processing photos from an external camera set to small JPEG output

Event Management

• Duplicating an event now correctly copies the experience type and target device, preventing an unnecessary re-setup prompt when opening on LumaBooth Dashboard
• New events now appear at the top of the event list immediately after being created
• Replaced the loading spinner with a progress bar when downloading event settings, providing clearer feedback on load progress
• Remote setting updates from LumaBooth Dashboard are now shown as a subtle toast notification instead of an intrusive modal alert
• Fixed a bug where "Settings updated remotely" was incorrectly shown every time the app launched after a force close
• Added a cancel button to the event settings download screen so you can exit without waiting
• Added a link to LumaBooth Dashboard directly within the app, making it easy to discover and manage events online

Sharing & Printing

• Improved email sharing reliability with an upgraded sending infrastructure
• Removed emoji characters from SMS messages, reducing message length and per-message cost
• Instagram sharing can now be independently toggled on or off in event settings
• Fixed an issue where the next screen could fail to open after dismissing the AirDrop share sheet
• The print limit reached state is now shown as an error icon on the print button rather than immediately hiding the button
• The print quantity + button is now correctly hidden when the session print limit has been reached
• Fixed an issue on Mac where the AirPrint callback fired twice, causing print counts to be recorded incorrectly

Design & Interface

• Updated the app icon and refreshed branding to the new LumaBooth look
• Guest-facing selection screens — effects, templates, and backgrounds — now use your event's primary color for a consistent branded experience
• Capture button icons and text now automatically switch between dark and light colors based on button background color, ensuring readability on any background
• Fixed settings cards not being properly centered and aligned on iPhone
• Fixed a black screen appearing when opening the Lock PIN screen from settings
• Fixed an issue where adding a multiple-choice survey question could interfere with a previously entered question
• Fixed long survey question text not displaying or wrapping correctly
• Dropdown checkmarks throughout settings now consistently appear in LumaBooth red
• Improved sticker editor zooming on Mac for smoother touchpad control
• Cancelling the disclaimer now correctly returns guests to the home screen instead of the background selection screen
• Increased the animated overlay file size limit from 15MB to 50MB to support higher-quality overlays
• Improved upload error messages to be more readable
• Fixed a navigation bar appearing unexpectedly on iOS 15.5 when navigating through AI Portrait settings

Stability

• Improved overall stability when opening events created in other LumaBooth apps or older app versions
• Fixed multiple camera-related crashes on iPhone and Mac, including crashes caused by unsupported frame rate settings
• Fixed a crash that could occur when applying a video overlay during GIF processing
• Fixed a crash triggered by the undo gesture in the welcome screen editor
• Fixed a crash when presenting screens from a background thread
• Fixed a crash on the iOS Simulator related to wired camera authorization
• Fixed crashes related to slow-motion video processing on iOS 18
• Resolved an issue where the app could freeze and the welcome screen become blurry during drop-off events
• Fixed a crash and session hang in Roaming Photographer mode when using an external camera with a single photo layout
• Fixed an issue where audio from a pre-roll virtual attendant could bleed into the recorded video audio
• Improved event settings preservation so that settings written by other apps are no longer overwritten when saving from LumaBooth

This release includes internal infrastructure improvements and stability updates to keep LumaBooth running smoothly.

This release focuses on stability and reliability improvements, resolving crashes, display issues on iOS 26 and macOS 26, and fixing several cloud synchronization and printing problems.

Stability & Crashes

• Resolved a crash that occurred when validating subscriptions, which caused the spinner to hang and the app to become unresponsive
• Fixed a freeze that could occur after a fresh install followed by logging in and out

Cloud & Sync

• Fixed an issue where cloud assets were not fully deleted when an event was removed
• Resolved an issue where new events could store an invalid layout reference instead of the proper cloud URL
• Improved cloud storage credential handling so fresh credentials are always used on app launch and after logout, helping users in regions where certain domains may be restricted

Settings Sync

• Fixed an issue where the currently open settings screen did not reflect changes made from another device
• Improved remote settings sync to correctly update screens that include downloadable assets

Printing

• Fixed an issue where printing multiple copies with AirPrint on certain printers (including Aircast Pro) could cause the printer to hang
• Resolved a blank/white print issue on macOS 26

iOS 26 & macOS 26 Compatibility

• Fixed oversized popups appearing on iPhone running iOS 26
• Corrected popup layouts throughout the app on iPhone, including survey, email sharing, and Virtual Attendant screens
• Fixed an extra space appearing at the top of the menu on macOS 26 in dark mode
• Fixed setting card alignment on iPhone so cards are properly centered and consistently spaced

Roaming Photographer

• Fixed an issue where Roaming Photographer mode did not process images after a camera capture event

This release improves printing reliability for AirPrint-compatible printers, resolving issues that could cause printers to hang when requesting multiple copies.

Printing

• Resolved an issue where requesting additional print copies could cause certain AirPrint printers (including the Aircast Pro and WCM Plus) to hang or become unresponsive

This release resolves printing reliability issues with AirPrint-compatible printers and restores correct behavior in Roaming Photographer mode.

Printing

• Resolved an issue where printing multiple copies using AirPrint-compatible printers (including the Aircast Pro and WCM Plus) could cause the printer to hang or produce blank prints

Roaming Photographer

• Resolved an issue where Roaming Photographer mode failed to process images, preventing photos from being shared or delivered to guests

This release includes minor internal updates with no customer-facing changes.

This release strengthens LumaBooth's security and reliability, introduces deeper iOS Guided Access integration for kiosk deployments, and delivers a range of camera, printing, and interface improvements based on customer feedback.

Security & Lock Screen

• Added iOS Guided Access integration with the lock button, providing a guided setup flow to help operators securely lock down the app at events
• Improved PIN code security with a 3-second delay after each incorrect attempt and a lockout after 5 failed tries, preventing rapid guessing
• Increased the maximum PIN code length to 10 digits for stronger access control
• Resolved an issue where settings were incorrectly saved when pressing the lock button without entering the settings screens
• The app now hides the number of PIN digits during unlock, preventing guests from guessing the code length

Event & Session Management

• The app now reopens the last active event in a locked state after a restart or crash, allowing events to resume seamlessly without exposing settings to guests
• Resolved an issue where the app could freeze on the welcome screen between sessions
• Improved compatibility when opening events created in dslrBooth or fotoShare Cloud, preventing crashes caused by unexpected or newer settings formats

Cloud & Connectivity

• Fixed an issue where saving event settings to Firebase could delete configuration data set by other apps sharing the same account, such as dslrBooth or the fotoshare.co web editor
• Resolved an issue where a changed fotoshare Cloud password would cause the app to repeatedly retry login requests, triggering an account lockout
• Updated the login and account API calls for improved compatibility with the latest fotoshare Cloud backend

Camera & Capture

• Added a live view preview in the camera setup screen so operators can see and apply rotation settings in real time before starting a session
• Resolved an issue where an erroneous "RAW only" error message appeared when shooting with dual memory cards (JPG on one card, RAW on another), even though the image was captured correctly
• Filter selection now displays the full preview image correctly when the device is in portrait orientation and the captured photo is landscape, eliminating the zoomed and blurry appearance

Printing

• Improved AirPrint multi-copy printing compatibility to prevent printers from hanging when additional copies are requested
• Updated print limit messages to clearly communicate when the per-image copy limit has been reached, rather than showing a generic error

Video & Overlays

• Updated the 360/Slo-mo mode icon and labels to better reflect the available video capture options
• Fixed an issue where the note text in a custom animated overlay did not update correctly when the device orientation or video side changed

Interface & Design

• Aligned text, buttons, and input fields across the survey and photo info panels for a more consistent editing experience
• Fixed a visual artifact on macOS where a black line appeared at the bottom of the settings screen header
• Resolved an issue on macOS where an alert message appeared in the wrong location after cancelling out of the survey response sharing flow
• Fixed a display issue where invalid print dimensions showed incorrect values in the settings interface
• Removed Twitter from the sharing options, as it is no longer supported

This release brings a collection of improvements to the print layout editor, text editing, and photo sharing, along with fixes for reliability issues reported by customers.

Print Layout

• Improved the print settings panel with clearer labeling and a more intuitive layout, including a dedicated "Printing" section with quick access to printer configuration
• Fixed an issue where the layout list could be cut off on the right side when running in fullscreen mode on Mac
• Added a convenient "Configure printers" link directly from the print layout view

Text & Layer Editing

• Text changes now update instantly on the canvas as you type, eliminating confusion when edits appeared not to apply
• Fixed an issue where newly imported images (such as a company logo) were not placed above existing layers as expected

Photo Sharing & Upload

• Resolved an upload error that prevented some users from sharing photos via FotoShare

Photos App Integration

• Fixed an issue where an empty "Print" album was being created in the Photos app at the start of each new session